Q. How do I strip a classroom with about 30 computers plugged in?
A. With just a few computers, I have placed Styrofoam blocks purchased from a carpet cleaning supply store inside the four corners. This elevates them 1" or more. Make sure the blocks are inside the parameter, so when you place the computer back down on the floor, you have stripped and finished an inch or two under the frame.
Then, take all the wires and gather them to the tightest wire and tape them with masking tape. The objective is to elevate them so they do not touch the floor. With 30 computers, there is no easy way, unless you ask the customer to remove all of them prior to the job.
However, it is best by far (if at all possible) to remove all the computers from the room to prevent stripper and floor finish from being splashed on them.
How to become a floor care expert Learn More...